Triton trekker manual

Trident Trikes warranties that its Trike Frames, Seat Frames and Steering Components are free of defects and workmanship for a period of 5 years from the date of purchase. This warranty is limited to the original owner and is non transferrable. It also does not apply to any components attached including, but not limited to: wheels, tires, chains, cables, seat cloth, and components.

These items are subject to the warranty if any of the original manufacturer. Warranty claims must be made in writing or by calling us. Proof of purchase will be required.

Get this manual by email. T12 ID. Need help? Post your question in this forum. Please read these instructions: they contain information necessary for safe and effective operation of this product.

This product has a number of unique features and, even if you are familiar with similar products, reading the instructions will help you get the full benefit of its unique design. Keep these instructions close to hand and ensure all users of this tool have read and fully understand them. Always use proper hearing protection when tool noise exceeds 80dB.

WARNING: This appliance is not intended for use by persons including children with reduced, physical or mental capabilities or lack of experience or knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children must be supervised to ensure that they do not play with the appliance. Save all warnings and instructions for future reference. Cluttered or dark areas invite accidents. Power tools create sparks which may ignite the dust or fumes.

Distractions can cause you to lose control. Never modify the plug in any way. Do not use any adapter plugs with earthed grounded power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. There is an increased risk of electric shock if your body is earthed or grounded. Water entering a power tool will increase the risk of electric shock.

Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. Use of a cord suitable for outdoor use reduces the risk of electric shock.

Use of an RCD reduces the risk of electric shock. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in serious personal injury. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Use of dust collection can reduce dust-related hazards. Use the correct power tool for your application.

The correct power tool will do the job better and safer at the rate for which it was designed. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. Such preventive safety measures reduce the risk of starting the power tool accidentally. Power tools are dangerous in the hands of untrained users.

If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use of the power tool for operations different from those intended could result in a hazardous situation. This will ensure that the safety of the power tool is maintained.

Keep your battery charger clean; foreign objects or dirt may cause a short or block air vents. Only use batteries provided with this power tool, or others recommended by the supplier.

Keep batteries clean; foreign objects or dirt may cause a short. Allow batteries to cool for 15 minutes after charging or heavy use. Failure to follow these instructions may cause overheating or fire. Ensure that batteries cannot accidentally short in storage. This can happen if the tool is overloaded or being used for extended periods of time. The battery will resume normal operation when the current draw returns to a normal safe level.

Please recycle where facilities exist. Check with your local authority or retailer for recycling advice Always wear ear, eye and respiratory protection Conforms to relevant legislation and safety standards Instruction warning T3.

Check with your local authority or retailer for recycling advice GB Do not incinerate battery packs Do not use before viewing and understanding the full operating instructions Internal fuse is time lag and maximum current is 3. Familiarise yourself with all its features and functions. Ensure that all parts of the tool are present and in good condition. If any parts are missing or damaged, have such parts replaced before attempting to use this tool.

Depress the Battery Release Grips 4 and remove the battery from the tool 2. Insert the battery into the Battery Charger 8. Do not use excessive force when inserting the battery. If it does not slide into place easily, it is not being inserted correctly 3. Initially only the green LED may flash as it evaluates the status of the battery. The battery charger will constantly monitor the condition of the battery when charging 6.

Remove the battery as soon as possible when completely charged 7. Under normal conditions the charger charges at a higher rate but reduces the charging rate as the battery becomes fully charged. It also allows the drill driver to stand vertically which may be advantageous for some uses. Please note the full charging time will be approximately minutes for the high capacity battery. If the battery is difficult to fit, check the condition of the battery and contacts Battery - length of service The length of service from each charging cycle will depend on the type of workload.

The battery charger and battery for this drill have been designed to provide a long troublefree working life. The charger intelligently monitors the condition of the battery and selects the ideal charging rate for the condition of the battery. It protects the battery from over-charging or charging at too high a rate. However, like all batteries, performance will be reduced over time. Recharge them immediately after they are discharged.

If the drill is stored for long periods of time without use, recharge the battery every three to four months and disconnect the battery from the power tool before it is stored. NOTE: Wear gloves when handling bits or accessories which are sharp or remain hot after use Fitting a driver bit 1. Release the quick release mechanism 3. Pull on the bit to check that it is securely fitted. Clean the body of your machine with a soft brush or dry cloth. In normal use it should provide a long working life.

Your details will be included on our mailing list unless indicated otherwise for information on future releases. Details provided will not be made available to any third party. This guarantee does not apply to commercial use nor does it extend to normal wear and tear or damage as a result of accident, abuse or misuse. Deze instructies bevatten informatie die u nodig hebt voor een veilige en doeltreffende bediening van dit product.

Dit product heeft een aantal unieke eigenschappen. Lees daarom deze handleiding altijd door, ook als u al bekend bent met bandschuurmachine, zodat u alle voordelen van dit unieke ontwerp kunt benutten. Houd deze handleiding bij de hand en zorg ervoor dat alle gebruikers van dit gereedschap de handleiding hebben gelezen en volledig hebben begrepen.

Rommelige en donkere ruimtes leiden vaak tot ongelukken. Elektrisch gereedschap brengt vonken teweeg die stof of dampen kunnen doen ontbranden. Door afleiding kunt u de controle over het gereedschap verliezen. Pas de stekker niet aan. Gebruik geen adapterstekkers bij geaard elektrisch gereedschap.

Het gebruik van ongewijzigde stekkers en passende stopcontacten vermindert het risico op een elektrische schok. Het risico op een elektrische schok neemt toe als uw lichaam geaard wordt.

Wanneer elektrisch gereedschap nat wordt, neemt het risico op een elektrische schok toe. In the USA for example this style of pickup is much less popular than the standard-sized models such as the best-selling car in that country, the Ford F In recent years Fiat rebadged a version of the Mitsubishi Triton as the Fiat Fullback for commercial customers. Early models of the pickup truck were small and basic much like the Toyota Hilux that proved popular at the same time.

Much like the Hilux, the original models were 2-door only with 4-door twin cab models not being introduced until the mids. Over the years the Triton grew in size while remaining in the compact pickup truck classification due to increased comfort and safety equipment onboard. The most recent version of the truck is the fifth-generation which is an export-only model not on sale in Japan.